Technical equipment

Information on the main mechanisms and equipment of the installation controls JSC «PROMTECHMONTAZH»

1. truck cranes load capacity from 16 to 70 tons – 36 units, including:

– LIEBHER  LTM-1070-4,2 (capacity 70 tons) – 1 unit;

– КС-65721-2 (capacity 60 tons) –  2 units.

2. tower cranes – 5 units.

3. auto lifts 22 – 30 meters – 14 units.

4. vehicles (tractors, dump trucks, other trucks) – 225 units, including:

– dump trucks – 4 units;

– truck tractors – 27 units;

– other trucks – 65 units;

– other cargo-passenger – 19 units;

– trailers, semi-trailers – 53 units;

– special – 17 units;

– buses, minibuses – 17 units;

– cars – 25 units.

5. tractors – 17 units.

6. loaders – 9 units.

7. concrete mixing plant (Germany) – 1 unit.

8. concrete pump (Italy) – 1 unit.

9. mixer truck – 1 unit.

10. excavator – 1 unit.

11. passenger-and-freight lifts – 7 units, including:

– Monitou MRT2540 – 4 units.

12. welding equipment for manual, semi-automatic, automatic, argon welding – 750 units, including:

– automatic welding machine Lincolnelectric  – 1 unit;

– automatic orbital welding installation – 1 unit.

 

Information about the main equipment of plants for the manufacture of building metal structures of OJSC “PROMTEKHMONTAZH”:

1. Equipment for the manufacture of construction, technological and special metal structures and products:

– metal guillotine cutting machines up to a thickness of 32 mm – 12 units;

–  gas plasma cutting machines – 7 units (4 of them CHPU);

– press brake (technical length are flexible up to 4 meters) – 4 units;

– leaf-straightening machine – 2 units;

– presses for punching, bending, cutting – 23 units.

2. Equipment for sheet metal processing for welding:

– longitudinal milling machine with dimensions of sheet processing 9×2.5 meters – 1 unit;

– machine planing planing with dimensions of sheet processing 9×2.5 meters with equipment for sheet trimming and chamfering along the perimeter – 1 unit;

– self-propelled chamfering devices on sheets – 4 units.

3. Equipment for the processing of profile metal, including:

– band sawing machines with a maximum section of 500×500 mm – 8 units.

4. Equipment for the assembly of bending profile metal, including:

– press for hot profile bending up to O 300 mm, equipped with a TVC installation – 1 unit;

– machines for cold profile bending (double tee up to number 20) – 4 units.

5. Equipment for the machining of components and blanks:

– lathe – 18 units;

– carousel lathe – 1 unit;

– milling machine – 9 units;

– surface grinding machine – 3 units.

6. Equipment for the manufacture of tanks and pipes:

– three and four roll rollers – 14 units;

– pipe rotators – 8 units;

– roller rotators – 10 units;

– stand for the manufacture of containers 5-100 m3 – 2 units;

– roll stand from 100-5000 m3 – 1 unit.

7. Welding equipment:

– welding columns, equipped with automatic machines for submerged-arc welding – 3 units;

– self-propelled welding machines – 12 units;

– welding semiautomatic devices – 70 units;

8. Equipment for anti-corrosion treatment:

– shot-blasting chambers with maximum processing dimensions of 5.5 x 5.5 x 16 meters – 2 units;

– appliances airless paint, including devices for 500 atmospheres – 7 units.

 

Welding inspection equipment:

– X-ray unit – 10 units;

– developing machine – 2 units;

– ultrasonic flaw detector – 5 units;

– ultrasonic thickness gauge – 1 unit;

– pendulum pile driver – 1 unit;

– tensile testing machine – 2 units;

– hardness tester – 1 unit;

– installation for monitoring tightness – 1 unit;

– installation for heat treatment – 4 units.